GP15A thru gp15m vishay semiconductors formerly general semiconductor document number 88638 www.vishay.com 08-jul-02 1 glass passivated junction rectifiers reverse voltage 50 to 1000v forward current 1.5a maximum ratings & thermal characteristics ratings at 25? ambient temperature unless otherwise specified. parameter symbol GP15A gp15b gp15d gp15g gp15j gp15k gp15m unit maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current 0.375" (9.5mm) lead length at t a = 55? i f(av) 1.5 a peak forward surge current 8.3ms single half-sine wave i fsm 50 a superimposed on rated load (jedec method) maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length at t a = 55? i r(av) 100 a typical thermal resistance (1) r ja 45 r jl 20 ?/w operating junction and storage temperature range t j ,t stg 65 to +175 ? electrical characteristics ratings at 25? ambient temperature unless otherwise specified. parameter symbol GP15A gp15b gp15d gp15g gp15j gp15k gp15m unit maximum instantaneous forward voltage at 1.5a v f 1.1 v maximum reverse currentt a = 25? 5.0 at rated dc blocking voltaget a = 150? i r 200 a typical reverse recovery time i f = 0.5a, i r = 1.0v, i rr = 0.25a t rr 3.5 s typical junction capacitance at 4.0v, 1mhz c j 15 pf note: (1) thermal resistance from junction to ambient and from junction to lead at 0.375 (9.5mm) lead length, p.c.b. mounted do-204ac (do-15) features ?plastic package has underwriters laboratory flammability classification 94v-0 ?high temperature metallurgically bonded construction ?cavity-free glass passivated junction ?capable of meeting environmental standards of mil-s-19500 1.5 ampere operation at t a =55? with no thermal runaway ?typical i r less than 0.1 a high temperature soldering guaranteed: 350?/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension mechanical data case: jedec do-204ac, molded plastic over glass body terminals: plated axial leads, solderable per mil-std-750, method 2026 polarity: color band denotes cathode end mounting position: any weight: 0.015 oz., 0.4 g 0.034 (0.86) 0.028 (0.71) dia. 0.140 (3.6) 0.104 (2.6) dia. 0.230 (5.8) 0.300 (7.6) 1.0 (25.4) min. 1.0 (25.4) min. * glass-plastic encapsulation technique is covered by patent no. 3,996,602 and brazed-lead assembly by patent no. 3,930,306 dimensions in inches and (millimeters) patented*
GP15A thru gp15m vishay semiconductors formerly general semiconductor www.vishay.com document number 88638 2 08-jul-02 ratings and characteristic curves (t a = 25 c unless otherwise noted) 0 25 50 100 75 125 150 175 0 0.25 0.5 0.75 1.0 1.5 1.25 1 10 100 10 20 30 40 50 0.4 0.6 0.8 1.0 1.2 1.4 1.6 10 1 0.1 0.01 1 10 100 10 1 30 0 20 40 60 80 100 0.01 0.1 1 10 average forward current (a) peak forward surge current (a) fig 3 ?typical instantaneous forward characteristics fig 2 ?maximum non-repetitive peak forward surge current fig 4 ?typical reverse characteristics fig 5 ?typical junction capacitance t j = 25 c f = 1.0 mhz vsig = 50mvp-p instantaneous forward current (a) junction capacitance (pf) ambient temperature, c number of cycles at 60hz percent of rated peak reverse voltage (%) instantaneous forward voltage (v) reverse voltage (v) 0.375" (9.5mm) lead length 60 hz resistive or inductive load t j = t j max 8.3ms single half sine-wave (jedec method) 0 pulse width = 300 s 1% duty cycle fig 1 ?forward current derating curve instantaneous reverse current ( a) t j = 125 c t j = 25 c fig. 6 ?typical transient thermal impedance 0.01 0.1 1 10 100 t -- pulse duration (sec) 0.1 10 100 1 transient thermal impedance ( c/w) t j = 25 c t j = 150 c t j = 75 c
|
